Hand Press Machine Setters for 10, 12.5 and 15mm Snap Fasteners
Suits:
-
- 10mm snap fasteners
- 12.5mm snap fasteners
- 15mm snap fasteners
These hand press setters suit the snap fasteners either 15mm, 12.5mm or 10mm diameter (see our other listings)
Description
Note: snap fastener dies are different to press stud dies.
A snap fastener (also known as a press stud, popper, snap or tich)
Is a pair of interlocking discs, which snap together when pressed under force.
These are used on fabric, leather or vinyl, attached with a hand setter or die (hand press machine setter).
Each press stud has 2 parts to each side, the female parts are usually on the side of the article that will be seen, the flap or side that opens,
The snap cap (the outside, often the decorative part) and the socket is attached to the cap through the leather or fabric.
The male parts are usually under the flap or opening, on the under side, not normally visible.
The stud-fits into the socket to give the snap, and is held in place through the fabric or leather with the base post.
Both the male and the female snap fastener setters (also known as dies) have 2 parts each.
The biggest parts have a 19mm diameter shaft that slips into the base hole of the hand press machine,
one to hold the snap cap, and the other to hold the base post until set – holding the stud in place.
and the 2 threaded setter-dies easily screw into the threaded upper arm of the hand press machine,
and by pressing the handle down, this rolls the snap cap post over inside the socket,
holding it securely in place, and the other compresses the stud over the base post
It is very quick and easy to interchange between styles of setters and the sizes.
Hardest part of using these tools is being organized
And keeping parts in a spot easy to find for next time
Virtually no maintenance apart from maybe a light wipe over with light machine oil.
Snap Fastener Setters available to suit
10mm snap fastener
12.5mm snap fastener
15mm snap fastener
Dimensions:
10mm snap fastener setter-female parts
-
- The snap cap
- Base – Total Height 28mm
- Base – diameter 19mm
- The socket
- Threaded shaft diameter M8 8mm (screws into the thread hole of upper arm of the HPM)
- total height 28mm
- top diameter 15mm
10mm snap fastener setter-male parts
-
- The post
- Base – Total Height 32mm
- top diameter 21mm
- Base Shaft diameter 19mm (fits in the base hole of HPM)
- The stud cap (with spring)
- Threaded shaft diameter M8 8mm (screws into the thread hole of upper arm of the HPM)
- total height 31mm
- top diameter 18mm (includes spring)
15mm snap fastener setter-female parts
-
- The snap cap
- Base – Total Height 27mm
- Base – diameter 19mm
- The socket
- Threaded shaft diameter M8 8mm (screws into the thread hole of upper arm of the HPM)
- total height 28mm
- top diameter 15mm
15mm snap fastener setter-male parts
-
- The post
- Base – Total Height 32mm
- top diameter 22mm
- Base Shaft diameter 19mm (fits in the base hole of HPM)
- The stud cap (with spring)
- Threaded shaft diameter M8 8mm (screws into the thread hole of upper arm of the HPM)
- total height 31mm
- top diameter 18mm (includes spring)
Base material
Reviews
There are no reviews yet.